How to Connect Brother Printer to WiFi ?

Connecting Brother printer to WiFi network is super easy! If you want to learn how to connect my Brother printer to WiFi, this post is meant for you. Today, we have come up with Brother printer how to connect to WiFi guide. This guide will walk you through the Brother printer WiFi setup and installation. .

Coming back to the Brother wireless printer setup , it is all about hooking up your printer to a WiFi network and then setting it up on your PC. After that, you just have to download and install the printer drivers and you are all set.

So let’s start with the Brother printer WiFi setup guide right away.

Requirements For Connecting Brother Printer to WiFi

If you want to learn how do I connect my Brother printer to WiFi network, you also need to go through the basic requirements. These are the points that you need to cross-check before you start with the Brother wireless printer setup.

To connect printer to WiFi, a wireless router is a must have thing.
A WiFi-compatible Brother printer
Neccessary cables and wires for the Brother printer setup
Properly configured wireless network
Power outlet nearby your router
A PC or laptop
An active internet connection on your network
Make sure you know the WiFi password of your network

How to Connect a Brother Printer to WiFi ?

You will find the necessary steps to learn how to go about the Brother wireless printer setup with a WiFI network. Make sure you do not miss any of the below-mentioned steps:

Turn On the Printer

Firstly, you need to power On your Brother printer. Connect your printer to a power cord and make sure it is switched On.

Configure the Network

This is the main point of Brohter printer WiFi setup.
Once the Brother printer turns On, you need to access its control panel.
Access the control panel and press Menu.
Use UP and DOWN keys to navigate through the Menu.
You need to navigate to the Network and then press OK.

Turn On WLAN

Now, you need to enable WLAN on your printer.
Use UP and DOWN keywords to scroll through the Menu again.
Then ,Once you reach the WLAN page, press OK.
It will enable WLAN on your printer for connecting Brother printer to WiFi.

Connect Brother Printer to WiFi

To learn how to connect Brother printer to WiFi, make sure you do not miss this step.
Navigate to the Brother printer setup wizard through the control panel.
Now, your printer will start searching for active WiFi networks nearby.
Select your home network that you wish to connect your Brohter printer to.
After that, Brother wireless printer setup wizard will show up.
Enter your home network’s password to connect to it.
At last, the Brother printer will be connected to the WiFi network.

Download Brother Printer Driver and Software

It is important that you install the drivers and software of your printer.
Most users miss out this step unknowingly and come across the Brother printer setup issues.
Now, Go to your PC and then open a web browser.
Navigate to the Brother downloads website.
Enter the model number of your printer and the suitable drivers and software will appear.
Download the Full Service Package on your PC.

Brother Printer Installation

For Brother printer WiFi setup, you need to install the drivers that you downloaded.
Install the Brother printer drivers and software.
After the installation, a setup window will show up.
Follow the on-screen instructions to successfully complete the Brother wireless printer setup.

Finally, you will learn how do I connect my Brother printer to WiFi network. It is super easy and takes almost 15 minutes. However, if you come across any issues, you will have to re-attempt the whole installation. Don’t worry, here are some of the tips and tricks that given in the subsequent section.

Facing Issues While Connecting Brother Printer to WiFi ? Fix here

Now, If you get stuck while attempting to connect Brother printer to WiFi, make sure you follow the steps below:

First of all, make sure the wireless router is powered On.
The internet should be active on your home network.
After that, ensure that the Brother printer is nearby the wireless router.
If the printer is placed too far from the router, it will surely face connectivity issues.
Make sure you have not enabled the VPN or MAC Filtration service on the WiFi network.
If everything seems fine, you can try again setting up your printer.
The Brother printer WiFi setup guide is already given above.
Make sure you follow the steps very carefully.

Final Thoughts

On this page, we discussed how to connect a Brother printer to WiFi network. Moreover, we also walked you through the tips and tricks to get rid of the setup issues if you face them while connecting Brother printer to WiFi. We hope you liked this Brother printer how to connect to WiFi guide.

This page was all about Brother wireless printer setup. If you face any issues or come across any doubts while attempting to learn how do I connect my Brother printer to WiFi, feel free to talk to our support team for more help.