How to Connect Pantum Printer to WiFi ?
The Pantum printer is among the top printers of all time. This printer is very easy to use compared to other printers. You just need to set up the printer and connect Pantum printer to WiFi and you’re good to go. It’s very important for the Pantum printer connect to WiFi, as without a WiFi connection, the printer cannot work. Therefore, you must accurately set up the printer and connect it to WiFi.
If you need help with the Pantum printer wireless setup, we’ve got you. Today, we’ll discuss the procedure to connect Pantum printer to WiFi. We’ll also explain the requirements for the printer WiFi setup.
Requirements to Connect Pantum Printer to WiFi
For the Pantum printer wireless setup, you require the following things:
- A setup router
- A web browser
- The correct IP address of the printer
- The default login credentials of the printer
These are some things you must have to connect Pantum printer to WiFi.
How to Connect Pantum Printer to WiFi ?
To connect Pantum printer to WiFi , you need to log into the printer’s user interface. For the login, you must have the correct IP address and default login credentials of the printer. You can find this information on the printer only. The steps for this are as follows:
- To begin with, connect your device to the printer’s network.
- If you are logging in through the PC, you can use an Ethernet cable to form a connection.
- Now, open a web browser of your choice and enter the IP address.
- When the login page appears, enter the default username and password.
- After that, the setup interface of the printer will appear.
- Hereon, select the SSID of your router and enter the password.
- At last, give the printer some time to connect to your WiFi.
- Once the connection is successful, you can configure the router accurately.
These are the steps to connect Pantum printer to WiFi. Ensure to follow these steps carefully to access the setup interface completely.
Conclusion
We hope you understood the steps for the Pantum printer connect to WiFi. After connecting the printer to the WiFi, you can start using the printer effectively. If there is anything else you require help with, you can reach out to our team right now.
FAQs
How do I Connect my Pantum printer to my computer wirelessly?
To connect your printer to the PC wirelessly, open the WiFi settings of the PC, and search for the printer’s network. The SSID name will begin with ‘Pantum-AP’ continued by some characters and numbers. After that, tap on the name, and the PC will connect to the printer’s network. Hereon, you can set up the printer accurately.
How do I manually Connect my printer to my computer?
You can manually connect your printer to your PC as well. All you need is a USB cable, connect one end to the printer and the other to your PC. For the login, it’s recommended to form a wired connection instead of a wireless one.
How to power cycle the Pantum printer?
To power cycle the printer, you just need to turn it OFF and unplug the power cord. After that, turn OFF the computer as well for some time. Wait for a minute to turn the PC and the printer back ON. The power cycle eliminates any minor glitches and bugs within the printer. You can power cycle your devices every once in a while.
Why is my printer not connected to my computer?
If your printer isn’t connected to the PC, it could be due to a loose cable. Check the cable and ensure to plug in the cable properly. If the cable is damaged, you might need to replace the cable.